Inlet temperature :140-350℃ automatically controlled
Recovery rate :>=95%
After-sales Service Provided :Engineers available to service machinery overseas
Weight :According to the actual system
Port :Shanghai Port
Contact Now
Atomizer Laboratory Spray Dryer
LPG series high-speed centrifugal atomizing drier is a special equipment and is suitable for drying emulsion, suspending liquid, liquor and so on. Particularly, it has worked perfect to dry polymers and resins; dyestuff and pigment; ceramics, glass, derust agent; pesticide; carbohydrate, dairy products; detergent and surfactant; fertilizer, organic compound, inorganic compound and so on.
After filtering and heating the air enters into the air distributor at the top of the drier. The hot air enters into the drying chamber in the spiral spray at the top of the tower. The material liquid will rotate and be sprayed into liquid beads. Through the very short time of contacting the heat air, the materials can be dried into the finished products. The finished products will continuously output through the bottom of dryer and separator. The waste gas will be discharged from blower.
Type
5
25
50
150
200-2000
Inlet temperature(℃)
140-350℃ automatically controlled
Outlet temperature(℃)
80-90℃
Max water evaporation(kg/h)
5
25
50
150
200-2000
Drying form of nozzle
Compressed air transmission
Mechanical transmission
Atomization diameter(mm)
50
120
120
150
180-240
Heat source
Electricity
Electricity+steam
Electricity+steam,oil fuel,hot air furnace
Max Electric heat power(kw)
9
36
72
99
Recovery rate dry powder(%)
≥95
1. How to choose you dry equipment?
At first, please inform us what kind of material you need to dry.
Second, you should inform us how much output you need per hour.
Third, what kind of heat source you have(Electric heating/oil furnace/gas furnace/coal furnace/stream)
2. Can you provide plant layout?
Yes, we can provide. Our clients should provide the CAD drawing and pictures of the scene. According to the CAD drawing, we can design the reasonable layout.
3. What’s your payment terms?
T/T or L/C is acceptable for us. Normally, we required 30% in advance, and 70% before delivery.
4. What about the lead time for delivery?
It depends on the size of the whole system. After confirming the system we use, we can inform the delivery time to you.
